Predrilling A Contour Pocket - Cycle64 - Siemens Sinumerik 840D sl Programming Manual

Programming cycles externally
16.1 Technology cycles
16.1.28

Predrilling a contour pocket - CYCLE64

Programming
CYCLE64(STRING[100] _PRG, INT _VARI, REAL _RP, REAL _Z0, REAL _SC,
REAL _Z1, REAL _F, REAL _DXY, REAL _UXY, REAL _UZ, INT _CDIR,
STRING[20] _TR, INT _DR, INT _UMODE, INT _GMODE, INT _DMODE, INT
_AMODE)
Parameters
Param Param
No.
Mask intern
1
PRG _PRG
2
_VARI
3
RP _RP
4
Z0 _Z0
5
SC _SC
6
Z1 _Z1
7
F _F
8
DXY _DXY
9
UXY _UXY
10
UZ _UZ
11
_CDIR
12
TR _TR
13
DR _DR
14
_UMODE
15
_GMODE
794
Explanation
Name Drilling/centering program
Machining type
UNITS: Reserved
TENS: Reserved
HUNDREDS: Reserved
THOUSANDS: Lift mode
0 = Lift off to retraction plane
1 = Lift off to reference point + safety clearance
Retraction plane (abs)
Reference point (abs)
Safety clearance (to be added to reference point, enter without sign)
Drilling/centering depth (see _AMODE UNITS)
Drilling/centering feedrate
Infeed plane - unit (see AMODE TENS)
Finishing allowance, plane
Finishing allowance, depth
Milling direction
0 = Climbing
1 = Conventional
Reference tool name
Reference tool D number
Reserved
Mode for evaluation of programmed geometrical data
UNITS: Reserved
TENS: Reserved
HUNDREDS: Select machining/only calculation of start point
0 = Normal machining (no compatibility mode needed)
1 = Normal machining
2 = reserved
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Job planning