Siemens Sinumerik 840D sl Programming Manual page 529

CTABMPOL
<n>
<memory
location>
<segment type>
Job planning
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Determine the maximum possible number of curve polynomials in
the specified <memory location>
Number (ID) of curve table
Specification of memory location (optional)
Static NC memory
"SRAM"
Dynamic NC memory
"DRAM"
Note:
If a value is not programmed for this parameter, the default memory
location set with
MD20905 $MC_CTAB_DEFAULT_MEMORY_TYPE is used.
Specification of segment type (optional)
Linear segments
"L"
Polynomial segments
"P"
Note:
If no value is programmed for this parameter, the sum of the linear
and polynomial segments is output.
Axis couplings
9.2 Curve tables (CTAB)
529