Siemens Sinumerik 840D sl Programming Manual page 51

Example: Initializing complete variable arrays
For the actual assignment, refer to the diagram.
Program code
N10 DEF REAL FELD1[10,3]=SET(0,0,0,10,11,12,20,20,20,30,30,30,40,40,40,)
N20 ARRAY1[0,0] = REP(100)
N30 ARRAY1[5,0] = REP(-100)
N40 FELD1[0,0]=SET(0,1,2,-10,-11,-12,-20,-20,-20,-30, , , ,-40,-40,-50,-60,-70)
N50 FELD1[8,1]=SET(8.1,8.2,9.0,9.1,9.2)
See also
Definition and initialization of array variables (DEF, SET, REP): Further Information Definition
and initialization of array variables (DEF, SET, REP): Further Information [Page 52]
General information about variables General information about variables [Page 17]
Job planning
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Flexible NC programming
1.1 Variables
51