Siemens Sinumerik 840D sl Programming Manual page 385

Description
The following machining operations are possible:
1. Longitudinal grinding
2. Face grinding
3. Grinding of a specific contour
4. Oblique plunge-cut grinding.
Machine manufacturer
The following settings are defined in machine data:
• The angle between a machine axis and the oblique axis,
• The position of the zero point of the tool relative to the origin of the coordinate system
specified by the "inclined axis" function,
• The speed reserve held ready on the parallel axis for the compensating movement,
• The axis acceleration reserve held ready on the parallel axis for the compensating
movement.
Job planning
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Transformations
6.8 Kinematic transformation
385