General Data, Pm260 - Siemens SINAMICS G120 Operating Instructions Manual

Technical data
10.2 Technical data, Power Modules
10.2.5.1

General data, PM260

Property
Line voltage
Input frequency
Power factor λ
Inrush current
Pulse frequency
Electromagnetic compatibil-
ity
Braking methods
Degree of protection
Operating temperature at
Storage temperature
Relative humidity
Pollution
Environmental requirements Protected against damaging chemical substances according to environmental class 3C2 to
Shock and vibration
Installation altitude
Standards
420
Version
660 V ... 690 V 3-ph. AC ± 10%
The power units can also be operated with a minimum voltage of 500 V –10 %. In this case,
the power is linearly reduced.
50 Hz ... 60 Hz, ± 3 Hz
0.9
< LO base load input current
16 kHz
The devices comply with EN 61800-3: 2004 suitable for Category C1 and C2 environments.
DC braking, energy recovery (up to 100% of the output power)
IP20 chassis units
LO base load power without derating
HO base load power without derating
LO/HO base load power with derating:
For details, see Restrictions for special ambient conditions (Page 428).
-40 °C ... +70 °C
< 95% - condensation not permissible
Protected according to pollution degree 2 to EN 61800-5-1: 2007
EN 60721-3-3; 1995
Long-term storage in the transport packaging according to Class 1M2 to EN 60721-3-1:
•
1997
Transport in the transport packaging according to Class 2M3 to EN 60721-3-2: 1997
•
Vibration during operation according to Class 3M2 to EN 60721-3-3: 1995
•
without derating: up to 1000 m above sea level
with derating: up to 4000 m above sea level
CE, C-TICK
0 °C ... +40 °C
0 °C ... +50 °C
Up to 60° C
For details, see Restrictions for special
ambient conditions (Page 428)
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB