Siemens SINAMICS G120 Operating Instructions Manual page 105

Default setting 114: "P1 fieldbus"
DO 0: p0730, ..., DO 2: p0732
Designation in BOP-2: p_f_P1
Default setting 120: "PID settings for pumps and fans"
The default setting restores the function of the terminal strip to the factory setting.
Technology controller setting:
• Ramp-up/down time for setpoint: p2257 = p2258 = 30 s
• Ramp-up/down time for controller output: p2293 = 30 s
• Actual value upper limit: p2267 = 120%
• Actual value filter time constant: p2265 = 10 s
Designation in
BOP-2:
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
AO 0: p0771[0], AO 1: p0771[1]
P_F_PID
Installing
4.6 Installing Control Unit
DI 2: r0722.2
105