Adapt The Default Setting Of The Terminal Strip - Siemens SINAMICS G120 Operating Instructions Manual

6.2.2

Adapt the default setting of the terminal strip

This chapter describes how you adapt the function of individual digital and analog inputs and
outputs of the inverter.
1)
Figure 6-3
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
When using the PM330 Power Module, the inverter also has terminals on the Control Unit via
4 digital inputs DI and 2 digital outputs DO on the Power Module.
Internal interconnection of the inputs and outputs
Advanced commissioning
6.2 Inverter control
155