Siemens SINAMICS G120 Operating Instructions Manual page 144

Low voltage converters, chassis and wall/panel mounted devices with cu230p-2 control units

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Commissioning

5.4 Commissioning with a PC

9. Set the check mark for "RAM to ROM (save data in the drive)" to save your data in the

You have now configured the inverter.

inverter so that it is not lost when the power fails.

Select "Finish".

Complete the configuration in STARTER

Complete the configuration in Startdrive

Converter with CU230P-2 Control Units

Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB

Sinamics g120c Sinamics g120p