Modes - Mitsubishi Electric MELSEC-Q Series User Manual

3.6.2

Modes

This section describes the modes of a master/local module.
(1) List of modes
Select the mode according to the system used.
Mode
Remote net Ver.1 • To configure a new system (only with Ver.1-compatible slave
mode stations)
• To configure a system including a Ver.2-compatible slave
Remote net Ver.2
station
mode
• More points are used compared to the remote net Ver.1 mode.
Remote net additional • To add a Ver.2-compatible slave station to an existing Ver.1
mode system (using the program of the Ver.1 system)
*1
• To configure a system only with remote I/O stations
Remote I/O net mode
*1 This mode cannot be selected for a local station.
Application
CHAPTER 3 SPECIFICATIONS
Connectable
Reference
slave station
Ver.1-compatible
Page 46, Section 3.6.3
slave station
Ver.1-compatible
Page 48, Section 3.6.4
slave station and
Ver.2-compatible
slave station
Page 51, Section 3.6.5
Remote I/O station Page 55, Section 3.6.6
3
43