11.4
CC-Link Diagnostics Using GX Works2
The status of a CC-Link system can be checked using a programming tool. Unlike link special relays (SBs) and link
special registers (SWs), the system status can be checked on a graphical window; therefore, corrective action can be
easily taken.
This section describes the CC-Link diagnostics using GX Works2.
Remark
For the CC-Link diagnostics using GX Developer, refer to Page 402, Appendix 7.3.
11.4.1
Monitoring the host station/other stations
Data link status of the host station (station to which a programming tool is connected) and other stations (stations other
than the host station) can be monitored.
1.
Open the "CC-Link Diagnostics" window.
[Diagnostics]
2.
Refer to the subsequent descriptions for operation.
Module list/
diagnostics
target selection
area
Station list
[CC-Link Diagnostics]
CHAPTER 11 TROUBLESHOOTING
311
11