Mitsubishi Electric MELSEC-Q Series User Manual page 55

(2) Data transfer between RX, RY, RWr, and RWw and a device in a CPU module
In the remote net additional mode, data of a Ver.1-compatible slave station are stored into a Ver.1-compatible
area, and data of a Ver.2-compatible slave station are stored into a Ver.2-compatible area.
(a) Automatic transfer by parameter settings using a programming tool
Setting a refresh device using the network parameter can automatically transfer data between RX, RY, RWr,
and RWw in a master/local module and a device in a CPU module. (
Section 7.4.2)
(b) Transfer using a program
Using an intelligent function module device (Un\G) and FROM/TO instructions transfers data between the
buffer memory areas in a master/local module and a device in a CPU module. Use this function to use a
different refresh device for each station or for other purposes.
• Ver.1-compatible area
Address
Hexadecimal
E0 to 15F
224 to 351
H H
160 to 1DF
352 to 479
H H
1E0 to 2DF
480 to 735
H H
2E0 to 3DF
736 to 991
H H
• Ver.2-compatible area
Address
Hexadecimal
4000 to 41FF
16384 to 16895
H H
4200 to 43FF
16896 to 17407
H H
4400 to 4BFF
17408 to 19455
H H
4C00 to 53FF
19456 to 21503
H H
Decimal
Remote input (RX)
Remote output (RY)
Remote register (RWw)
Remote register (RWr)
Decimal
Ver.2-compatible remote input (RX)
Ver.2-compatible remote output (RY)
Ver.2-compatible remote register (RWw)
Ver.2-compatible remote register (RWr)
CHAPTER 3 SPECIFICATIONS
Page 97, Section 7.3.2, Page 115,
Item
Page 331, Appendix 2 (2)
Page 333, Appendix 2 (3)
Item
Page 341, Appendix 2
(10)
Page 342, Appendix 2
(11)
3
Reference
Reference
53