Setting Details - Mitsubishi Electric MELSEC-Q Series User Manual

7.3.2

Setting details

Item
Select the number of master/local modules (number of modules
to be mounted on one base unit) that are set using a
Number of Modules programming tool.
Do not include the number of master/local modules that are set
using the dedicated instruction (G(P).RLPASET).
Set the station
Select it when graphically configuring "Station Information
information in the
Setting" by referring to the network map display area. (for GX
CC-Link
configuration
Works2 only) (
window
Set the start I/O number of a master/local module in units of 16
Start I/O No.
points.
Set the operations to be performed at an error or when the switch
on a CPU module is set to STOP.
Operation Setting
(
Description
Page 102, Section 7.3.2 (2) (a))
Page 101, Section 7.3.2 (1))
CHAPTER 7 PARAMETER SETTINGS
Setting range
Varies depending on a CPU module.
( User's manual for the CPU module
used)
(Default: Blank)
• The station information is not set in the CC-
Link configuration window. (not checked)
• The station information is set in the CC-Link
configuration window. (checked)
(Default: The station information is not set in
the CC-Link configuration window. (not
checked))
Within the range of I/O points of the CPU
module
(Default: Blank)
–
7
97