Mitsubishi Electric MELSEC-Q Series User Manual page 258

(2) Assignment of the remote I/O (RX, RY) and remote register (RWr, RWw)
In the program example, the following assignment is used to perform data link.
The status of a device assignment can be checked on GX Works2 by setting information of a slave station on the CC-Link
configuration window on GX Works2. (
[View]
Remark
● When a master/local module is in the remote net Ver.2 mode or remote net additional mode
In the system configuration of the program example, the assignment is the same as that in the remote net Ver.1 mode,
except for buffer memory addresses of data storage locations. (
(a) Remote I/O (RX/RY)
Plan the assignment using the assignment sheet on Page 407, Appendix 8.1 (1).
CPU module
Device
X1000 to X100F
X1010 to X101D
CPU module
Device
Y1000 to Y100F
Y1010 to Y101D
256
Page 102, Section 7.3.2 (2) (a))
[Docking Window]
Master station
Buffer memory address
Hexadecimal Decimal
E0
224
H
E1
225
H
Master station
Buffer memory address
Hexadecimal Decimal
160
352
H
161
353
H
[Device Reference]
Page 48, Section 3.6.4, Page 51, Section 3.6.5)
Station number
1
Station number
1
Slave station
Remote I/O
Module name
(RX/RY)
RY0 to RYF
QJ61BT11N
RY10 to RY1D
Slave station
Remote I/O
Module name
(RX/RY)
RX0 to RXF
QJ61BT11N
RX10 to RX1D