Mitsubishi Electric MELSEC-Q Series User Manual page 251

(2) Program example
1.
Create the following program on a programming tool.
Confirmation of the data link status
Initialization procedure registration
2
AJ65VBTCU-68ADVN: Initial setting change
AJ65VBTCU-68ADVN: Digital output value reading
AJ65VBTCU-68ADVN: Process at error occurrence
CHAPTER 10 PROGRAMMING
Data link is normal.
(AJ65VBTCU-68ADVN,
AJ65VBTCU-68DAVN)
Data link error
(AJ65VBTCU-68ADVN)
Data link error
(AJ65VBTCU-68DAVN)
Turn off the initialization
procedure registration instruction.
Turn on the initialization
procedure registration instruction.
A/D conversion enable/prohibit
specification (RWw0)
CH.1 to 4 input range setting
(RWw1)
Averaging process specification
(RWw3)
CH.2 average time, number of
times setting (RWw5)
Turn on Initial data setting
request flag (RY19).
Turn off Initial data setting
request flag (RY19).
Read CH.1 digital output value
(RWr0).
Read CH.2 digital output value
(RWr1).
Read Error code (RWr8).
Turn on Error reset request flag
(RY1A).
Turn off Error reset request flag
(RY1A).
(To the next page)
249
10