Mitsubishi Electric MELSEC-Q Series User Manual page 108

Item
The list of slave stations is displayed. Information about slave stations
Module List can be set to the master station by drag and drop of the items from
"Module List" to "List of stations".
The list of CC-Link modules is displayed. Select modules from
Select CC-Link
"General CC-Link Module" if they are not in the list.
Search modules by the station type or model name.
Find Module The modules displayed in "Find Result" can be moved to "List of
stations" by drag and drop.
The modules registered in "My Favorites" are displayed. To register
modules in "My Favorites", perform any of the following.
My Favorites • Right-click on the module listed in "Select CC-Link".
• Right-click on the module displayed in "Find Result" of "Find
Output Error details are displayed if settings are not configured properly.
(b) When the checkbox next to "Set the station information in the CC-Link configuration
window" is not checked
1.
Set "Mode" and "Total Module Connected" in the "Network Parameter" window and open "CC-Link
Station Information" window.
Project window
button
2.
Input setting values.
3.
When completing the setting, close the "CC-Link Station Information" window.
Item
The order of the slave station is displayed before the slash.
Station No. The start station number of the slave station is displayed after the
slash.
Select the station type of the slave station. Set the same type of the
slave station actually connected.
Station Type
Select "Intelligent Device Station" for a local station or standby master
station.
Select the expanded cyclic setting for the slave station. The setting
Expanded Cyclic
can be selected only when "Ver.2 Remote Device Station" or "Ver.2
Setting
Intelligent Device Station" is set to "Station Type".
106
Description
Module".
[Parameter]
button
Description
[Network Parameter] [CC-Link]
Setting range
–
–
Setting range
–
Varies depending on the mode set to
"Mode".
• Single
• Double
• Quadruple
• Octuple
(Default: Single)