Parameter Setting List - Mitsubishi Electric MELSEC-Q Series User Manual

7.2

Parameter Setting List

This section lists the parameter setting items for a master/local module and whether the settings are required for each
station.
Item
Number of Modules
Start I/O No.
Parameter Name
Data Link Faulty Station
Setting
Case of CPU STOP Setting
Auto Detect Setting of the
Operation
Connected Device
Setting
Number of Occupied Stations
Expanded Cyclic Setting
Block Data Assurance per
Station
Type
Master Station Data Link Type
Mode
Total Module Connected
Remote Input(RX)
Remote Output(RY)
Remote Register(RWr)
Remote Register(RWw)
Ver.2 Remote Input(RX)
Ver.2 Remote Output(RY)
Ver.2 Remote Register(RWr)
Ver.2 Remote Register(RWw)
Special Relay(SB)
Special Register(SW)
Retry Count
Automatic Reconnection Station Count
94
: The setting is required. : The setting is required as the occasion demands. ×: The setting is not required.
Necessity of a setting
Master station
×
×
×
Local station,
standby
master station
Set it only when "Remote Net(Ver.1 Mode)",
× "Remote Net(Ver.2 Mode)", or "Remote
Net(Additional Mode)" is set to "Mode".
Set it only when "Remote Net(Ver.2 Mode)" or
"Remote Net(Additional Mode)" is set to "Mode".
It is automatically input when "Station Type" is
set in the CC-Link configuration window.
×
It is automatically input when "Mode" is set in
the CC-Link configuration window.
It is automatically input when the station
× information is set in the CC-Link configuration
window.
Set it only when "Remote Net(Additional Mode)"
is set to "Mode".
×
The settings are not required when "Remote I/O
Net Mode" is set to "Mode".
×
Remark
–
–
–
–
–
–
–