Table of Contents
Advertisement
MX8000 Installation and Operation Guide
Space, 0-9, :, -, _, ., ,, &, *, #
A-Z
a-z
There are 16 characters available for each user name.
Note: If no characters are entered in the name field, the user name will default to "User #XX". XX = the
number location of the user being programmed. For example, if user 12 location is being programmed and
no name characters are entered in the name field, then that user will be named User #12 .
When the desired character is flashing in the display:
7. Press the
right arrow key.
8. Repeat steps 6 and 7 until the user's name is complete.
ENTER
9. Press
.
MENU
10. Enter the desired PIN code for the user.
A minimum of 4 characters and a maximum of 9 characters.
ENTER
11. Press
.
MENU
The display will flash Operator.
12. Press the
or
13. When the desired profile level is flashing press
5.6.2
Editing a User
Use the following steps to edit an existing user:
1. Log on to the receiver. (See Section 4.4.4 for log on procedure.)
ENTER
2. Press
button.
MENU
7
3. Press
for program menu.
The display will briefly display
3
4. Press
to choose user list.
2
5. Press
to edit a user.
A list of all the users will appear starting with the lowest user number.
6. Press the
or
7. When the equal sign highlights the user you wish to edit press
8. If you do not want the user name changed, press
Or
5–72
Table 5–18: Available Characters
Characters
The word "Space" indicates that a physical space
would be inserted if this character were chosen.
Upper case alphabetical characters
Lower case alphabetical characters
arrow buttons to toggle between Installer and Operator.
Initializing
Please wait . . .
arrow buttons to move through the user list.
Comments
ENTER
.
MENU
ENTER
MENU
ENTER
.
MENU
.
Advertisement
Table of Contents
Troubleshooting
