Table 4-7: Event Format Choices And Meaning; Figure 4-16: Event Format Menu Items - Honeywell ADEMCO MX8000 Installation And Operation Manual

MX8000 Installation and Operation Guide
How to Print Line Card Statistics
Follow these steps to print line card statistics:
1. Log on to the receiver (see Section 4.4.4 for log on procedure).
ENTER
2. Press the
MENU
6
3. Press for the printer menu. (See Figure 4–12.)
1
4. Press for print report menu. (See Figure 4–13.)
5
5. Press to print the statistics for all line cards.
6. Press to exit menu.
4.6.8.2 Edit Event Format
Edit event format allows you to configure what information
will print on reports to the receiver.
Follow these steps to configure the report format:
1. Log on to the receiver (see Section 4.4.4 for log on
procedure).
ENTER
2. Press the
MENU
items.
6
3. Press for the printer menu. (See Figure 4–12.)
2
4. Press for event format menu items. (See Figure
4–16.)
5. Press the or
definitions.)
Event Format
Options
Y (Yes)
Date/Time
N (No)
Y (Yes)
N (No)
Format Type
Y (Yes)
Reference
N (No)
Number
Call Separator Y (Yes)
N (No)
Y (Yes)
Device Number
N (No)
Print
Condensed
Y (Yes)
4–14
button to view the main menu items.
button to view the main menu
button to move through the event format choices. (See Table 4–7 for choice
Table 4–7: Event Format Choices and Meaning
Choices
Y = Date and time will print for each report message to the printer.
N = Date and time will not print for each report message to the printer.
Y = The reporting format type of the calling control panel will print for each report
message to the printer.
N = The reporting format type of the calling control panel will not print for each
report message to the printer.
Note: The Format Type will be listed as a number, which represents the format
used for that communication.
Y = The reference number will print for each report message to the printer.
N = The reference number will not print for each report message to the printer.
(See Figure 4–7)
Y = Print a dashed-line between each message report to the printer.
N = Do not print a dashed-line between each message report to the printer.
Y = Print the device number of the reporting message to the printer.
N = Do not print the device number of the reporting message to the printer.
N = Printer output in normal mode.
Y = All print data on a single line.
<Event Format Menu:>
01=Date/Time [Y]
02 Format Type [Y]
03 Ref Number [Y]
<Event Format Menu:>
04=Call Sep [Y]
05 Device Num [Y]
06 Prt Condensed[N]
<Event Format Menu:>
05 Device Num
06 Prt Condensed[N]
< Exit Menu
Figure 4–16: Event Format Menu Items
Meaning
¯
­
¯
­
[Y]