Honeywell ADEMCO MX8000 Installation And Operation Manual page 183

Program Mode
Choices
Options
MX8000–
Line Device
LC3
Menu
3 Line
Table A–1: Programming Quick Chart
Choices Choices
Add Use Defaults
Device #
Device
Copy Existing
Handshake
Sequence
Format
Group
Handshake
Sequence
Handshake
Duration
Handshake
Wait
Handshake Ack
Duration
5-Digit Format
6-Digit Pulse
Pulse
Inter-digit Tm
Format
(ms)
Ack on Even
Round
Partially
Extended
Direct
Edit Line
+
Number of
Line
Line #
Rings
Options
Country
Threshold
Sample Time
Listen In Mode
PBX string edit
screen
Listen In
Timeout
Listen In
account edit
screen
Echo Suppress
Caller ID
Billing Delay
Hunt Group
Misc. Line
Options
Ring Options
Call Hang-up
Appendix A – Programming Quick Chart
(cont'd)
Choices Choices
1 through 6
1400_2300–2, 1400Hz,
2300Hz, 2225Hz,
Modem II, Modem IIE,
Westec, 1400_2300Hz,
or Unused
0-9999 in 1ms periods
0-9999 in 1ms periods
0-9999 in 1ms periods
4/1, 3/2, 3/1CS
4/2, 3/2CS, 4/1CS
0 or 1 ms to 2 Sec.
Yes or No
Yes or No
Y (yes)
N (no)
0-255
Country of choice
0-15 in 2.75VDC steps
0-90 seconds
Common, PBX, Not
Used
Up to 20 characters.
0-255 seconds?
Add, Edit, or Clear
Account.
Y (yes)
N (no)
Y (yes)
N (no)
On
Off
00-99
Min Ring (15-99)
Max Ring (015-100)
Ring Off (1500-8000)
Min Ring Off (100-800)
Ring Error (0800-4400)
Min # Ring Per (01-20)
60-180 sec
Comments
See Section 5.5.1 for details.
See Section 5.5.2.1 for details.
CS = Check Sum. If a pulse comes in a
5-digit format then the data will then be
treated as the selected format.
CS = Check Sum. If a pulse comes in a
6-digit format then the data will then be
treated as the selected format.
This feature selects the time period
between data blocks. See Section
5.5.2.2 for details.
If "Yes" Acknowledge only on even
rounds.
If "Yes" you have multiple extended data
blocks for 3/1 or 4/1 format.
Y = dedicated or direct connect phone
line.
N = used for standard phone lines.
See Section 5.5.2.3 for details.
See Section 5.5.2.4 for details.
See Section 5.5.2.5 for details.
A–5