Honeywell ADEMCO MX8000 Installation And Operation Manual page 106

MX8000 Installation and Operation Guide
3. Press the or
4. When the desired setting is flashing press
How to Set 3/1 Restore Output
1. Follow the procedures in Section 5.5.2.
6
2. Press for Ademco Auto Opt. menu (see Figure 5–20).
3. Press the button.
The display Flashes on the 3/1 Rstr= field.
4. Press the or
5. When the desired setting is flashing press
How to Set 4/2 Out
1. Follow the procedures in Section 5.5.2.
6
2. Press for Ademco Auto Opt. menu (see Figure 5–20).
3. Press .
The display Flashes on the 42Out= field.
4. Press the or
5. When the desired setting is flashing press
6. To exit press .
How to Set FBII Out
1. Follow the procedures in Section 5.5.2.
6
2. Press for Ademco Auto Opt. menu (see Figure 5–20).
3. Press
The display Flashes on the FBI= field.
4. Press the or
5. When the desired setting is flashing press
6. To exit press .
How to Set Pulse Extended
1. Follow the procedures in Section 5.5.2.
6
2. Press for Ademco Auto Opt. menu (see Figure 5–20).
5–50
button to change the option from HiSpeed to 4/2 or vice versa.
ENTER
button to change the option from HiSpeed to 3/1 or vice versa.
ENTER
button to change the option from HiSpeed to Normal or vice versa.
ENTER
.
button to change the option from S/Fast to LAR300 or vice versa.
ENTER
.
MENU
.
MENU
.
MENU
.
MENU