Table of Contents
Advertisement
To Change the Listen-In Timeout:
Timeout is the amount of time Listen-in will remain active before timing out.
Note: This setting will only have an affect if using the common mode. When using the PBX mode, the call is
transferred to another number and the line card drops the call.
1. Follow the procedures in Section 5.5.2.
4
2. Press
for Listen In options menu.
3. Press
until the display flashes on the <Timeout> field.
4. Enter the desired value from the keypad or press the
setting. Values range from 0 to 255 in 1 second increments.
5. When the desired value is flashing press
To Edit the Listen-In Accounts Lists:
Note: The accounts lists apply to panels that do not send listen-in commands as a part of their message
(Contact ID E606 or SIA LF and LE). Panels that send listen-in commands as part of their message do not
need their account number in an account list.
1. Follow the procedures in Section 5.5.2.
4
2. Press
for Listen In options menu.
3. Press
until the display flashes on the <Account List> field.
ENTER
4. Press
.
MENU
Figure 5–17 shows the next display.
To Add a Listen-In Account
Note: Panels that send listen-in commands (Contact ID E606
or SIA LF and LE) as part of their message do not need their
account number in an account list.
1 .
1. Press
The display briefly shows the number (indicated by XX) of the
lowest available listen in account number slot (20 total listen
in account numbers [strings]). Adding # XX
Note: The account numbers may contain wild card entries (*
and #) described in Table 5–14. Therefore, the 20 account
numbers are actually up to 20 unique strings.
2. Enter the account number you wish to add to the listen in account list.
3. When the desired account number is flashing press
Characters
0-9
A-Z
*
#
ENTER
MENU
Table 5–14: Account Characters
Numeric entries
Alpha entries
Alphanumeric wild card entry. Example: 123* = any account starting with 123.
Numeric wild card entry. Example: # = 0 to 9. Example: 12345# = 123450 to 123459.
or
button to change the timeout
.
Mode=Not Used
Timeout=000
<Account List>
<Listen Mode <=Exit>
<Listen In Accounts>
1=Add Account
2 Edit Account
3 Clear Account
Figure 5–17: MX8000–LC3 Listen In
ENTER
.
MENU
Description
Section 5 – Programming
¯
Accounts Menu
ENTER
MENU
5–45
Advertisement
Table of Contents
Troubleshooting
