Table of Contents
Advertisement
How to Set On Hook Gain
On hook gain sets the analog receive Caller ID gain prior to line pickup.
Note: This option is will only be applicable when Caller ID has been selected.
1. Follow the procedures in Section 5.5.2.
7
2. Press
for Line Gain Opt. menu (see Figure 5–21).
3. Press the
The display Flashes on the OHGain= field.
4. Press the
or
5. When the desired setting is flashing press
6. To exit press
.
How to Set Ringer Impedance
Ringer Impedance allows the impedance the Caller ID chip presents to the phone line to be set for either
High or Synthesize.
Note: This option is will only be applicable when Caller ID has been selected.
1. Follow the procedures in Section 5.5.2.
7
2. Press
for Line Gain Opt. menu (see Figure 5–21).
3. Press the
The display Flashes on the RImp= field.
4. Press the
or
5. When the desired setting is flashing press
6. To exit press
.
5.5.3
Edit Line – MX8000–LRR
To edit an existing Line, follow these steps:
1. Log on to the receiver. (See Section 4.4.4 for log on procedure.)
ENTER
2. Press
button.
MENU
7
3. Press
for program menu.
The display will briefly display
2
4. Press
to choose Line Device menu.
2
5. Press
to select MX8000–LRR.
.
button to change the On Hook Gain.
ENTER
MENU
.
button to change the Ringer Impedance.
ENTER
MENU
Initializing
Please wait . . .
.
.
Section 5 – Programming
5–53
Advertisement
Table of Contents
Troubleshooting
