Figure 5-18: Mx8000-Lc3 Miscellaneous Phone Line Options - Honeywell ADEMCO MX8000 Installation And Operation Manual

MX8000 Installation and Operation Guide
To Edit a Listen-In Account
2 .
1. Press
2. Press the or
ENTER
3. Press .
MENU
4. Enter the revised account number you wish to the account list. See Table 5–14.
ENTER
5. Press .
MENU
Note: When editing an existing account it must be completely re-entered.
To Clear a Listen-In Account
3 .
1. Press
2. Press the or
ENTER
3. Press .
MENU
The Display will read:
4. Press the or
Note: Additional presses of the up or down arrow will toggle the choice between "yes" and "no".
ENTER
5. Press .
MENU
5.5.2.5 Misc. Line Opt.
Some phone lines may use echo suppression, a billing
delay feature, a hunt group or you may need to set
various ring options. These miscellaneous phone options
can be set through this programming menu.
To Change the Echo Suppress Setting:
If echo suppression is enabled (Y) a 2025Hz signal will be
output for two seconds to disable echo suppression
equipment. This option should be used only for panels
that require a 2225Hz handshake.
1. Follow the procedures in Section 5.5.2.
5
2. Press for Miscellaneous Line Options menu (see Figure 5–18).
The display Flashes on the Echo Spr= field.
3. Press the or
4. When the setting is flashing press
5–46
button until the desired listen in account is highlighted by the equal sign.
button until the desired listen in account is highlighted by the equal sign.
< WARNING! >
Delete Record No
button to toggle to Yes.
button to change the echo suppress option from Y (Yes) to N (No) or vice versa.
ENTER
.
MENU
<Edit Line :01>
5 Misc. Line Opt.
6 Ademco Auto Opt.
7 Line Gain Opt.
Echo Spr=N Call ID=Y
BillDly=N HntGrp=00
<Ring Opt> HngUp=120
<Echo Suppress<=Exit>
Figure 5–18: MX8000–LC3 Miscellaneous Phone
Line Options
­