MX8000-3EX Installation and Operation Guide
1
5. Press
to add a user.
The user number to be programmed will appear in the display for one second. This user number will
always be the lowest available user number.
6. Press the
or
Space, 0-9, :, -, _, ., ,, &, *, #
A-Z
a-z
There are 16 characters available for each user name.
Note: If no characters are entered in the name field, the user name will default to "User #XX". XX = the
number location of the user being programmed. For example, if user 12 location is being programmed and
no name characters are entered in the name field, then that user will be named User #12 .
When the desired character is flashing in the display:
7. Press the
right arrow key.
8. Repeat steps 6 and 7 until the user's name is complete.
ENTER
9. Press
.
MENU
10. Enter the desired PIN code for the user.
A minimum of 4 characters and a maximum of 9 characters.
ENTER
11. Press
.
MENU
The display will flash Operator.
12. Press the
or
13. When the desired profile level is flashing press
5.5.2
Editing a User
Use the following steps to edit an existing user:
1. Log on to the receiver. (See Section 4.4.4 for log on procedure.)
ENTER
2. Press
button.
MENU
7
3. Press
for program menu.
The display will briefly display
3
4. Press
to choose user list.
2
5. Press
to edit a user.
A list of all the users will appear starting with the lowest user number.
6. Press the
or
5–52
arrow buttons to move through the available characters.
Table 5–16: Available Characters
Characters
The word "Space" indicates that a physical space
would be inserted if this character were chosen.
Upper case alphabetical characters
Lower case alphabetical characters
arrow buttons to toggle between Installer and Operator.
Initializing
Please wait . . .
arrow buttons to move through the user list.
Comments
ENTER
.
MENU