Honeywell ADEMCO MX8000 Installation And Operation Manual page 89

Select Line
Device Device
Type Menu Choice
Edit Line Line #
(cont'd) (cont'd)
MX8000–
LC3
3 Line
Use Default
(cont'd)
Copy
Device(s)
Copy
Existing
Clear Choose
Device Device #
View Choose
Device Device #
Add
Device #
Device
Central
Station #
Odd/Even
Network
Edit Line
VPN
A/B Network A/B
Monitor
Station Flag
MX8000–
LRR
Use Default
Copy
Device(s)
Copy
Existing
Clear Choose
Device(s) Device #
View Choose
Device(s) Device #
Table 5–11: Line Device Menu Options (cont'd)
Choice Choice
CID Monitor
CID Gain
Line Gain
Opt (cont'd)
On Hook
Gain
Ringer
Impedance
Device #
Device # of
Source &
Target
Device
Use
Defaults
Copy
Existing
000-255
Odd/Even
Yes/No
Yes/No
Device #
Device # of
Source &
Target
Device
Choice Default
Norm, Pream,
DTMF, or Norm
Marks
–6, –2, 0, 2,
3.5, 4.8, 6, or 2dB
7dB
2, 3.5B, 4.8,
7dB
6, or 7dB
Hi or Sy Hi
017
Even
No
A
No
Section 5 – Programming
Comments
Used to set Caller ID
detection methods,
gain, and impedance.
See Section 5.5.2.7
for more information.
These options are
only used if Caller ID
is enabled as
described in Section
5.5.2.5.
Choose Device(s) #
that you wish to be
programmed to factory
defaults.
Copy the program-
ming of one Device
(source) and paste it
into one or several
(target) Devices.
Deletes a Device from
the receiver.
Views what Devices
are installed.
Choose Device(s) #
that you wish to be
programmed to factory
defaults.
Copy the
programming of one
Device (source) and
paste it into one or
several (target)
Devices.
Deletes a Device from
the receiver.
Views what Devices
are installed.
5–33