Table of Contents
Advertisement
MX8000 Installation and Operation Guide
How to Set Monitor Station
1. Follow the procedures in Section 5.5.2.7.
2. Press
The display Flashes on the Mon= field.
3. Press the
or
4. When the desired setting is flashing press
5. To exit press
.
5.5.4
Edit Line – MX8000–LC1 (1 Line)
To edit an existing Line Device, follow these steps:
1. Log on to the receiver. (See Section 4.4.4 for log on procedure.)
ENTER
2. Press
button.
MENU
7
3. Press
for program menu.
The display will briefly display
2
4. Press
to choose Line Device menu.
3
5. Press
to select MX8000–LC1 (1 Line)
2
6. Press
to edit Line.
The display will show a list of the existing Lines.
7. Press the
or
8. When the equal sign is on the Line you wish to edit:
ENTER
Press
. The display will show a list of choices. Table 5–16 lists these choices and provides a brief
MENU
description.
Edit Line List
1 Handshake Seq
2 Pulse Format
3 Line Options
4 Listen In
5 Misc. Line Opt.
6 Ademco Auto Opt
5–56
.
button to change the option from Yes to No or vice versa.
Initializing
Please wait . . .
arrow buttons to move through the available list.
Table 5–16: MX8000–LC1 Edit Line List Items and Description
This function is used to program the handshake order and
parameters for this Line.
Used to set the 5- and 6-digit format, Interdigit timeout,
acknowledgement, and to select if partially extended is enabled.
Used to set number of rings, ring on/off duration, threshold voltage,
and sample time.
Used to program the parameters for the listen in (two-way voice
communication) feature if used. Must not be used in UL installations.
Used to program hunt group number, enable or disable echo
suppression, and billing delay.
Used to select the BFSK auto output, 3/1 restore output, pulse
output, and FBII output.
ENTER
.
MENU
Description
Advertisement
Table of Contents
Troubleshooting
