Table of Contents
Advertisement
4.4
Log On / Log Off
Persons operating the MX8000 must log on and off the system. This is a way of keeping track of who is
operating the system at any given time. You can program a total of 40 codes. Each code will be assigned to
one of two user profiles (Installer profile or Operator profile). (See Section 4.4.3 for default user codes.)
4.4.1
Installer Profile
The Installer profile will have access to all options on the main menu (see Table 4–4 for "Main Menu"
options).
4.4.2
Operator Profile
The Operator profile has access to fewer main menu options than the Installer profile (see Table 4–4). These
options allow the operator to perform basic operation of the MX8000. Both profiles can acknowledge all calls
and events.
Note: See Section 4.6 for detailed information on the main menu options.
You must have at least one Installer Profile Code programmed in the system at all times.
4.4.3
Default User Codes
At initial power up, the system provides two default user codes. User code 1 defaults with an Installer profile
and user code 2 defaults with an Operator profile. Table 4–5 shows the default codes and their profiles.
*Note: User code 1 can be changed but not deleted. User code 1's profile will always remain as "installer".
4.4.4
How to log on the system.
Follows these steps to properly log on to the system:
LOG
1. Press the
STATUS
The VFD will display
2. Enter your PIN code. (See Table 4–5 for default codes.)
Note: This screen will time out after 15 seconds.
Table 4–4: Main Menu Option Items by Profile
Installer
Profile
✔
✔
✔
✔
✔
✔
✔
✔
Table 4–5: Default User Codes
User Number
*1
2
button.
Enter Log In Code:
[ ]
Operator
Menu Options
Profile
✔
Call History
✔
System History
✔
System Info
✔
Set Time & Date
✔
System Restart
Printer Menu
Program Menu
Diagnostics
Default Code
Default Profile
(PIN)
8000
Installer
1111
Operator
Section 4 – Operation
4–5
Advertisement
Table of Contents
Troubleshooting
