Figure 5-27: Mx8000-Lc1 Listen In Accounts Menu - Honeywell ADEMCO MX8000 Installation And Operation Manual

MX8000 Installation and Operation Guide
To Add a Listen-In Account
Note: Panels that send listen-in commands (Contact ID E606
or SIA LF and LE) as part of their message do not need their
account number in an account list.
1 .
1. Press
The display briefly shows the number (indicated by XX) of
the lowest available listen in account number slot (20
total listen in account numbers [strings]). Adding # XX
Note: The account numbers may contain wild card entries
(* and #) described in Table 5–14. Therefore, the 20
account numbers are actually up to 20 unique strings.
2. Enter the account number you wish to add to the listen in account list.
3. When the desired account number is flashing press
To Edit a Listen-In Account
2 .
1. Press
2. Press the or
ENTER
3. Press .
MENU
4. Enter the revised account number you wish to the account list. See Table 5–14 on page 5–45.
ENTER
5. Press .
MENU
Note: When editing an existing account it must be completely re-entered.
To Clear a Listen-In Account
3 .
1. Press
2. Press the or
ENTER
3. Press .
MENU
The Display will read:
4. Press the or
Note: Additional presses of the up or down arrow will toggle the choice between "yes" and "no".
ENTER
5. Press .
MENU
5–64
button until the desired listen in account is highlighted by the equal sign.
button until the desired listen in account is highlighted by the equal sign.
< WARNING! >
Delete Record No
button to toggle to Yes.
Mode=Not Used
Timeout=000
<Account List>
<Listen Mode <=Exit>
<Listen In Accounts>
1=Add Account
2 Edit Account
3 Clear Account
Figure 5–27: MX8000–LC1 Listen In
Accounts Menu
ENTER
.
MENU
ENTER
MENU
¯