D-Link xStack DGS-3420 Series Reference Manual page 626
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
config mac_based_access_control password <passwd 16>
Parameters
<passwd 16> - In RADIUS mode, the switch communicates with the RADIUS server using this
password. The maximum length of the key is 16 characters.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the password "rosebud" that will be used for authentication via RADIUS server:
DGS-3420-28SC:admin#config mac_based_access_control password rosebud
Command: config mac_based_access_control password rosebud
Success.
DGS-3420-28SC:admin#
55-4
config mac_based_access_control method
Description
This command is used to authenticate via a local database or a RADIUS server.
Format
config mac_based_access_control method [local | radius]
Parameters
local - Specify to authenticate via local database.
radius - Specify to authenticate via RADIUS server.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the MAC-based access control method as local:
DGS-3420-28SC:admin#config mac_based_access_control method local
621
Advertisement
Table of Contents
