D-Link xStack DGS-3420 Series Reference Manual page 723

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To display the protocols or applications that support the enhanced log:
DGS-3420-28SC:admin#show log_software_module
Command: show log_software_module
CFM_EXT
ERPS
DGS-3420-28SC:admin#
63-11 config log_save_timing
Description
This command is used to set the method to save log.
Format
config log_save_timing [time_interval <min 1-65535> | on_demand | log_trigger]
Parameters
time_interval - Specify to save log to Flash every xxx minutes. If no log occurs in this period, nothing
will be saved.
<min 1-65535> - Specify the time between 1 and 65535 minutes.
on_demand - Specify to save log to Flash whenever the user types "save log" or "save all". This is
the default.
log_trigger - Specify to save log to Flash whenever log arrives.
Restrictions
Only Administrator and Operator-level users can issue this command..
Example
To configure method to save log as on demand:
DGS-3420-28SC:admin# config log_save_timing on_demand
Command: config log_save_timing on_demand
Success.
DGS-3420-28SC:admin#
DHCPv6_CLIENT
ERROR_LOG
DHCPv6_RELAY
MSTP
718
DHCPv6_SERVER
VRRP