D-Link xStack DGS-3420 Series Reference Manual page 925

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Authentication Fail Attempts : 2
Rekey Timeout
TCP Port Number
Bypass Login Screen State
DGS-3420-28SC:admin#
17-11 config ssh publickey bypass_login_screen state
Description
This command is used to enable or disable bypassing login screen which is used to avoid a secondary
username/password authentication for users using SSH public key authentication.
Format
config ssh publickey bypass_login_screen state [enable | disable]
Parameters
enable - Specify to bypass the username/password login screen to avoid a secondary authentication
after using SSH public key authentication. If this method is specified, the login user using SSH
public key authentication can execute command directly with the initial privilege level of the login
user.
disable - Specify to need a secondary username/password authentication after using SSH public key
authentication. If this method is specified, the login user using SSH public key authentication must
pass username/password authentication before execution shell is obtained. The initial privilege
level depends on the secondary username/password authentication.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the secondary username/password authentication for users using SSH public key
authentication:
DGS-3420-28SC:admin#config ssh publickey bypass_login_screen state disable
Command: config ssh publickey bypass_login_screen state disable
Success.
DGS-3420-28SC:admin#
: Never
: 22
: Disabled
920