Show Vrrp - D-Link xStack DGS-3420 Series Reference Manual
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#config vrrp ipif System authtype simple authdata 12345678
Command: config vrrp ipif System authtype simple authdata 12345678
Success.
DGS-3420-28SC:admin#
30-6
delete vrrp
Description
This command is used to delete the VRRP entries.
Format
delete vrrp {vrid <vrid 1-255> ipif <ipif_name 12>}
Parameters
vrid - (Optional) Specify the Virtual Router ID used.
<vrid 1-255> - Enter the Virtual Router ID used here. This value must be between 1 and 255.
ipif - (Optional) Specify the IP interface name used.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
long.
If no parameter is specified, all the VRRP entries will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete VRRP:
DGS-3420-28SC:admin#delete vrrp vrid 1 ipif System
Command: delete vrrp vrid 1 ipif System
Success.
DGS-3420-28SC:admin#
30-7
show vrrp
Description
This command is used to display the VRRP settings.
1011
Advertisement
Table of Contents
