Clear Arptable; Show Ipfdb - D-Link xStack DGS-3420 Series Reference Manual
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
7-6
clear arptable
Description
This command is used to remove dynamic entries from the ARP table. Static ARP entries are not
affected.
Format
clear arptable
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To remove the dynamic entries from the ARP table:
DGS-3420-28SC:admin#clear arptable
Command: clear arptable
Success.
DGS-3420-28SC:admin#
7-7
show ipfdb
Description
This command is used to display the IP address forwarding table on the Switch.
Format
show ipfdb {[ip_address <ipaddr> | interface <ipif_name 12> | port <port>]}
Parameters
ip_address - (Optional) Specifies the IP address of the forwarding table.
<ipaddr> - Enter the IP address to be displayed.
interface - (Optional) Specifies the interface name of the forwarding table.
<ipif_name 12> - Enter the interface name here. This name can be up to 12 characters long.
port - (Optional) Specifies the port to be displayed.
<port> - Enter the port number to be displayed.
157
Advertisement
Table of Contents
