39-23 Show Igmp_Snooping Forward_Lookup_Mode - D-Link xStack DGS-3420 Series Reference Manual
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
39-23 show igmp_snooping forward_lookup_mode
Description
The command is used to display the IGMP snooping forward lookup mode on the Switch.
Format
show igmp_snooping forward_lookup_mode
Parameters
None.
Restrictions
None.
Example
To display the IGMP snooping forward lookup mode:
DGS-3420-28SC:admin#show igmp_snooping forward_lookup_mode
Command: show igmp_snooping forward_lookup_mode
IGMP snooping forward lookup mode: MAC address.
DGS-3420-28SC:admin#
39-24 config igmp access_authentication ports
Description
This command is used to enable or disable the IGMP Access Control function for the specified ports. If
the IGMP Access Control function is enabled and the Switch receives an IGMP JOIN message, the
Switch will send the access request to the RADIUS server for authentication.
Format
config igmp access_authentication ports [all | <portlist>] state [enable {[auth_accounting |
auth_only | accounting_only]} | disable]
Parameters
all - Specify all ports to be configured.
<portlist> - Specify a range of ports to be configured.
state - Specify the state of the RADIUS authentication function on the specified ports.
462
Advertisement
Table of Contents
