D-Link xStack DGS-3420 Series Reference Manual page 514
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Success.
DGS-3420-28SC:admin#
To delete a static ipv6 IMPB entry that binds the IPv6 address fe80::240:5ff:fe00:28 to the MAC
address 00-00-00-00-00-11:
DGS-3420-28SC:admin# delete address_binding ip_mac ipv6address
fe80::240:5ff:fe00:28 mac_address 00-00-00-00-00-11
Command: delete address_binding ip_mac ipv6address fe80::240:5ff:fe00:28
mac_address 00-00-00-00-00-11
Success.
DGS-3420-28SC:admin#
44-8
show address_binding
Description
This command is used to display address binding information.
Format
show address_binding {ports {<portlist>}}
Parameters
ports – (Optional) Specify to display the state of IP MAC port binding for all ports.
<portlist> - Enter the list of ports for the display here.
Restrictions
None.
Example
To display address binding information:
DGS-3420-28SC:admin#show address_binding
Command: show address_binding
Roaming state
Trap/Log
DHCP Snoop(IPv4)
DHCP Snoop(IPv6)
ND Snoop
Autosave state
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
509
Advertisement
Table of Contents
