D-Link xStack DGS-3420 Series Reference Manual page 149
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Rule ID : 2
(auto assign)
Match on
Source IP
Destination IP
DSCP
Action:
Permit
Matched Count : 0 packets
================================================================================
DGS-3420-28SC:admin#
The following example displays an egress access profile that supports an entry mask for each rule:
DGS-3420-28SC:admin# show egress_access_profile profile_id 1
Command: show egress_access_profile profile_id 1
Egress Access Profile Table
================================================================================
Profile ID: 1
Mask on
Source MAC
Available Hardware Entries : 127
--------------------------------------------------------------------------------
Rule ID : 1
Match on
VLAN ID
Source MAC
Action:
Permit
================================================================================
DGS-3420-28SC:admin#
6-5
show current_config egress_access_profile
Description
This command is used to display the egress ACL part of current configuration in user level of privilege.
Port group: 1
: 10.0.0.1
: 10.90.90.90
: 25
Profile name: 1
Type: Ethernet
: FF-FF-FF-FF-FF-FF
Port group: -
: 1
: 00-00-00-00-00-01
144
Advertisement
Table of Contents
