D-Link xStack DGS-3420 Series Reference Manual page 157

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
id - (Optional) Specifies the port group ID.
<value 1-64> - Enter the port group ID used here. This value must be between 1 and 64.
name - (Optional) Specifies the port group name.
<name 16> - Enter the port group name here. This name can be up to 16 characters long.
If not specified parameter, will show all the port group.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To show all the port group information:
DGS-3420-28SC:admin# show port_group
Command: show port_group
Port Group Table
---------------------------------------------
Port Group ID
1
2
4
Total Entries :3
DGS-3420-28SC:admin#
Port Group Name
group1
group2
group3
Ports
1-2,5
4-5,7,9,11,13,15,17,19-25
5-7
152