D-Link xStack DGS-3420 Series Reference Manual page 233

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
17-6 show route redistribute dst rip
Description
This command is used to display the route redistribution settings on the Switch. It displays the
redistribution with the target protocol RIP.
Format
show route redistribute dst rip {src [local | static]}
Parameters
src - (Optional) Specifies the source protocol.
static - Display the redistribution with the source static.
local - Display the redistribution with the source local.
If no parameter is specified, the system will display all route redistributions.
Restrictions
None.
Example
To display route redistributions:
DGS-3420-28SC:admin# show route redistribute dst rip
Command: show route redistribute dst rip
Route Redistribution Settings
Source Destination
Protocol Protocol
-------- ------------
STATIC RIP
LOCAL RIP
Total Entries : 2
DGS-3420-28SC:admin#
17-7 show route redistribute
Description
This command is used to display the route redistribution settings on the Switch.
Type Metric
-------- ------------
All Transparency
All 1
228