D-Link xStack DGS-3420 Series Reference Manual page 154

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
profile_name - (Optional) Specifies the name of the profile.
<name 1-32> - Enter the profile name used here. This name can be up to 32 characters long.
access_id - (Optional) Specifies the access ID.
<value 1-128> - Enter the access ID used here. This value must be between 1 and 128.
Restrictions
None.
Example
To display current egress flow meter table:
DGS-3420-28SC:admin# show egress_flow_meter
Command: show egress_flow_meter
Flow Meter Information:
------------------------
Profile ID : 1
CIR:1000(Kbps) CBS:2000(Kbyte)
Actions:
Conform : Permit
Exceed : Permit
Violate : Drop
Profile ID : 1
CIR:2500(Kbps) CBS:2000(Kbyte)
Actions:
Conform : Permit
Exceed : Permit
Violate : Drop
Total Entries: 2
DGS-3420-28SC:admin#
6-8 create port_group id
Description
This command is used to create a port group.
Format
create port_group id <value 1-64> name <name 16>
Parameters
id - Specifies the port group ID.
Access ID : 1
PIR:2000(Kbps)
Replace DSCP : 11
Replace DSCP : 22
Access ID : 1
EBS:3500(Kbyte)
Replace DSCP: 33
Mode : trTcm / color-blind
PBS:2000(Kbyte)
Counter : enable
Counter : enable
Mode : srTcm / color-blind
Counter : enable
Counter : enable
149