D-Link xStack DGS-3420 Series Reference Manual page 545

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
<port_number 1-65535> - Specify a TCP port value between 1 and 65535.
udp_port - (Optional) Specify a UDP port number between 1 and 65535.
<port_number 1-65535> - Specify a UDP port value between 1 and 65535.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure servers the PC may need to connect to in order to complete JWAC authentication:
DGS-3420-28SC:admin#config jwac update_server add ipaddress 10.90.90.109/24
Command: config jwac update_server add ipaddress 10.90.90.109/24
Update Server 10.90.90.0/24 is added.
Success.
DGS-3420-28SC:admin#
45-16 config jwac switch_http_port
Description
This command is used to configure the TCP port which the JWAC switch listens to. This port number
is used in the second stage of the authentication. PC users will connect to the page on the switch to
input the user name and password. If not specified, the default port number is 80. If no protocol is
specified, the protocol is HTTP.
Format
config jwac switch_http_port <tcp_port_number 1-65535> {[http | https]}
Parameters
<tcp_port_number 1-65535> - Specify a TCP port which the JWAC switch listens to and uses to
finish the authenticating process.
http - (Optional) Specify the JWAC run HTTP protocol on this TCP port.
https - (Optional) Specify the JWAC run HTTPS protocol on this TCP port.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the TCP port which the JWAC switch listens to:
540