D-Link xStack DGS-3420 Series Reference Manual page 785
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the pdelay_req_interval attribute of all the PTP ports to 4 seconds:
DGS-3420-28SC:admin# config ptp p2p_transparent ports all pdelay_req_interval 4
Command: config ptp p2p_transparent ports all pdelay_req_interval 4
Success.
DGS-3420-28SC:admin#
3-4
show ptp
Description
This command is used to display the configured attributes of PTP on the switch.
Format
show ptp
Parameters
None.
Restrictions
None.
Example
To show the global PTP configuration:
DGS-3420-28SC:admin# show ptp
Command: show ptp
PTP State Setting
PTP Mode Setting
PTP Transport Protocol Setting
PTP Clock Domain Number Setting
PTP Clock Domain Name Setting
DGS-3420-28SC:admin#
: Enabled
:
Boundary Clock
:
UDP
:
0
:
Internal Domain
780
Advertisement
Table of Contents
