Config Gvrp - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#
32-8 show port_vlan
Description
This command is used to display the GVRP status for a port list on the switch.
Format
show port_vlan {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
Note: If no parameter is specified, the system will display GVRP information for all ports.
Restrictions
None.
Example
To display 802.1q port settings for ports 1 to 3:
DGS-3420-28SC:admin#show port_vlan 1-3
Command: show port_vlan 1-3
Port PVID GVRP
------- ---- --------
1 1 Disabled
2 1 Disabled
3 1 Disabled
Total Entries : 3
DGS-3420-28SC:admin#
32-9

config gvrp

Description
This command is used to set the GVRP timer's value.
Ingress Checking Acceptable Frame Type
---------------- ----------------------------
Enabled All Frames
Enabled All Frames
Enabled All Frames
1030