D-Link xStack DGS-3420 Series Reference Manual page 660

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
58-9 clear mld_snooping statistics counter
Description
This command is used to clear the MLD snooping statistics counters.
Format
clear mld_snooping statistics counter
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear the MLD snooping statistics counters:
DGS-3420-28SC:admin#clear mld_snooping statistics counter
Command: clear mld_snooping statistics counter
Success.
DGS-3420-28SC:admin#
58-10 config mld_snooping querier
Description
This command is used to configure the time, in seconds, between general query transmissions, the
maximum time to wait for reports from listeners, and the permitted packet loss that guarantees MLD
snooping.
Format
config mld_snooping querier [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all]
{query_interval <sec 1-65535> | max_response_time <sec 1-25> | robustness_variable <value 1-
7> | last_listener_query_interval <sec 1-25> | state [enable | disable] | version <value 1-2>} (1)
Parameters
vlan_name - Specify the name of the VLAN for which MLD snooping querier is to be configured.
<vlan_name 32> - Specify the VLAN name. The maximum length is 32 characters.
vlanid - Specify the ID of the VLAN for which MLD snooping querier is to be configured.
655