D-Link xStack DGS-3420 Series Reference Manual page 693
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
61-6
config nlb unicast_fdb
Description
This command is used to add or delete the forwarding ports for the specified NLB unicast FDB entry.
Format
config nlb unicast_fdb <macaddr> [add | delete] <portlist>
Parameters
<macaddr> - Specify the MAC address of the NLB unicast FDB entry to be configured.
add - Specify to add the ports.
delete - Specify to delete the ports.
<portlist> - Specify a list of forwarding ports to be added or removed.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure NLB unicast FDB entry, for the product that support the VLAN information on the unicast
forwarding:
DGS-3420-28SC:admin#config nlb unicast_fdb 02-BF-01-01-01-01 add 1:1-1:5
Command: config nlb unicast_fdb 02-BF-01-01-01-01 add 1:1-1:5
Success.
DGS-3420-28SC:admin#
61-7
delete nlb unicast_fdb
Description
This command is used to delete the NLB unicast FDB entry.
Format
delete nlb unicast_fdb <macaddr>
Parameters
<macaddr> - Specify the MAC address of the NLB unicast FDB entry to be deleted.
688
Advertisement
Table of Contents
