Managing Phone Reset And Codec Connectivity; Information About Phone Reset - Cisco CTS-500 Configuration Manual

Chapter 3 Verifying and Troubleshooting the Cisco TelePresence System Configuration
Example 3-2
Do you want to continue ? (y/n):y
Preparing the system...
Please enter the passcode:12345
Sorry that was an invalid passcode...
Logging off
Connection to 10.00.00.100 closed.
dhcp-249:~ $
When you enter the correct passcode, the CTS will then reset the administration account name and
password to the system defaults. The following example shows successful password reset information:
Example 3-3
Please enter the passcode:507530
resetting admin name and password
stopping any existing admin session
admin account and password reset to default
success in applying security rules
Logging off
Connection to 10.00.00.100 closed.
dhcp-249:~ $
Note If you are using the CTS with a Cisco Unified Communications Manager, the next time you perform a
"Refresh" or "Reset" from the Cisco Unified CM, the administration account name and password will
be reconfigured to the values specified in the Cisco Unified CM device page.

Managing Phone Reset and Codec Connectivity

The following sections contain information about managing the following system components:
•
•
•
•
•

Information About Phone Reset

If a device is not registered with Cisco Unified Communications Manager, you cannot reset or restart it.
If a device is registered, to restart a device without shutting it down, click the Restart button. To shut
down a device and bring it back up, click the Reset button. To return to the previous window without
resetting or restarting the device, click Close.
OL-21851-01
Invalid Password Reset Request
Successful Password Reset Request
Information About Phone Reset, page 3-11
Resetting the Cisco Unified IP Phone 7970 Series, page 3-12
Synchronizing a Phone, page 3-12
Resetting the Cisco Unified IP Phone 7970 Series Factory Image, page 3-13
Restoring Connectivity to the Codec, page 3-13
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Managing Phone Reset and Codec Connectivity
3-11