Configuring The Options File; Adding A Cisco Telepresence Device - Cisco CTS-500 Configuration Manual

Configuring Cisco Unified CM for Cisco TelePresence Manager
As you add each Cisco Unified CM, do not set up non-DNS and DNS in a
Note
Cisco Unified CM is configured with DNS but has IP address in the Server Configuration. In a typical
deployment, all applications are either DNS or non-DNS. A Cisco Unified CM node that has been
designated as publisher is not supported in
Step 5 Click Save.
Step 6 To display and modify settings that associate CTS-Manager with Cisco Cisco Unified CM, choose
Configure > Unified CM in the CTS-Manager administration interface.
To ensure proper connection and settings display in CTS-Manager, perform a "discovery" in
Tip
CTS-Manager before changing settings in Cisco Unified CM.

Configuring the Options File

Cisco Unified CM is customized with an options file to configure support for the Cisco TelePresence
device.
To configure the options file, follow these steps:
Log into the Cisco Unified CM Administration application. See the
Step 1
Pre-Qualification Assistant" section on page
Add the Cisco TelePresence device pack to Cisco Unified CM. The device pack adds functionality to
Step 2
Cisco Unified Communications Manager so that you can create a Cisco TelePresence device. See the
"Testing Cisco Unified CM with the Pre-Qualification Assistant" section on page
Create a Cisco TelePresence device to register the Cisco TelePresence device as a Cisco Unified IP
Step 3
Phone. See the
Step 4 Assign a directory number to the Cisco TelePresence device. See the
the Pre-Qualification Assistant" section on page
Step 5 Create a Cisco Unified IP Phone 7975 device type.
Auto registration cannot be used to create the device type.
Note

Adding a Cisco TelePresence Device

Use the information in the following sections to add a CTS device:
•
•
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
6-18
"Creating a New Cisco TelePresence Device" section on page
Downloading Device Packs, page 6-19
Installing the Device, page 6-19
Chapter 6 Setting Up the Room to Use Cisco TelePresence Manager
mixed mode.
"Testing Cisco Unified CM with the
6-20.
6-20.
mixed mode environment.
6-20.
1-5.
"Testing Cisco Unified CM with
OL-21851-01