Cisco CTS-500 Configuration Manual page 34

Configuration guide for the cisco telepresence system
Table of Contents

Advertisement

Configuring a Cisco TelePresence Device
Table 1-4
Product Specific Configuration Layout (continued)
Field
Lights
Idle Display
CTS Auto Answer
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
1-14
Chapter 1
Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Required? Description
Yes
Defines how the lights operate in a CTS conference room. The choices are:
On with calls only (default)
On with display settings
On all the time
On the CTS 500, the lights are powered by the display. When the display
Note
turns off according to the display settings in Cisco Unified CM, the lights
also turn off. However, if you have selected the "On all the time" setting for
the lights, the setting is not honored during power saving/non-business
hours (when display settings are not active). To bypass power
saving/non-business hours defaults, extend the business hours to all the time
in the Display On Duration field.
See also
Notes About Auxiliary
Yes
Selects the idle screen on the phone interface when CTS is idle. Choices are:
Default Detailed (default)
Manual
Directory
Favorites
Default Simple
Yes
Allows the CTS endpoint to override the Cisco Unified CM
line.
Choices are:
Follow
CUCM
Internal calls are set to
External calls are set to No Auto Answer
Note
When uploading Cisco Unified CM software, the Cisco Unified IP Phone
must be configured so that CTS Auto Answer is turned off. This enables the
CTS to answer the call instead of the phone.
CTS Override - Auto Answer All—Sets Auto Answer on for both internal and
external calls regardless of the DN configuration.
CTS Override - Auto Answer Internal Only—Sets Auto Answer on for internal
calls regardless of the DN configuration.
CTS Override - Auto Answer External Only—Sets Auto Answer on for external
calls regardless of the DN configuration.
Note
Turn Auto Answer off on the CTS and the phone to use the
Office
Note
Auto Answer is set to No by default on the CTS 500 32."
Control.
DN Settings (default)—
Auto Answer
feature.
DN
settings on a shared
or No Auto Answer
One Phone Per
OL-21851-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unified communications manager

Table of Contents