Directory Number Settings - Cisco CTS-500 Configuration Manual

Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Step 3 Make sure that the check box at the bottom of the Directory Number Information section is marked as
indicated: 
Active: Checked
Step 4 Click Save to save your settings.

Directory Number Settings

The fields described in
Table 1-16
Field
Voice Mail Profile
Calling Search Space
Presence Group
User Hold MOH Audio
Source
Network Hold MOH Audio
Source
Auto Answer
OL-21851-01
Table 1-16 are left unchanged in the Directory Number Settings box:
Cisco TelePresence Device Directory Number Settings
Required?
—
—
Yes
—
—
Yes
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Assigning a Directory Number to the Cisco TelePresence Device
Setting
<None>
<None>
Leave the default setting.
<None>
<None>
Leave the default setting.
Additional drop-down menu choices:
• Auto Answer Off
Note Set Auto Answer Off to use the
Office feature.

Optionally, you can set Auto Answer Off and
instead configure the
Configuration Layout
to have the CTS pick up the call. This may be
desired if you want to use the Cisco Unified IP
Phone speakerphone.
• Auto Answer with Headset
• Auto Answer with Speakerphone
Note To assign a directory number for the shared-line
Cisco Unified IP Phone, select Auto Answer with
Speakerphone. See the
Number for the Shared-Line Cisco Unified IP
Phone" section on page
If the call is connected as audio only, verify that the
Note
following check-boxes are checked: 

—Disable Speakerphone 
—Disable Speakerphone and Headset
One Phone Per
Product Specific
"CTS Auto Answer" setting
"Assigning a Directory
1-38.
1-33