Contents - Cisco CTS-500 Configuration Manual

Setting Up the Room to Use Cisco TelePresence
Manager
Revised: September, 2010, OL-21851-01
Complete the steps in
Note
Cisco TelePresence System"

Contents

CTS Manager software allows you to schedule and manage Cisco TelePresence System calls. As an
integral part of the Cisco TelePresence experience, the CTS-Manager software facilitates call scheduling
and setup from common enterprise groupware such as Microsoft Exchange and Lotus Notes.
This chapter provides an overview of how to add parameters to Cisco Unified Communications Manager
(Cisco Unified CM) and collect information from the current installation of the Cisco Unified CM to
initialize the Cisco TelePresence Manager meeting schedule application.
Note For more complete information about CTS-Manager, see the
page on Cisco.com.
This chapter contains the following configuration tasks:
•
•
•
•
•
OL-21851-01
Chapter 1, "Configuring Cisco Unified Communications Manager for the
before configuring
Configuring Microsoft Messaging Software for Cisco TelePresence Manager, page 6-2
Configuring IBM Domino for CTS-Manager, page 6-12
Configuring Cisco Unified CM for Cisco TelePresence Manager, page 6-13
Testing Cisco Unified CM with the Pre-Qualification Assistant, page 6-20
Where to Go Next, page 6-21
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
C H A P T E R
Cisco TelePresence Manager.
Cisco TelePresence System Manager
6
home
6-1