Directory Number Information - Cisco CTS-500 Configuration Manual

Assigning a Directory Number to the Cisco TelePresence Device
Configuring the Directory Number for the Cisco TelePresence Device
You must restart your system after you have completed the configuration tasks in this section.
Note
Use the information in the following sections to configure the directory number in the Directory Number
Configuration window. When you have finished entering configuration information, click Save and
follow the prompts to restart the system.
•
•
•
•
•
•
•
•
•

Directory Number Information

Use the information in this section to assign a meeting room name and unique room phone number. The
room name and phone number appears on the Cisco WebEx OneTouch Participant list when your
meeting is Cisco WebEx-enabled.
To configure settings in the Directory Number Information box, follow these steps:
Step 1 If you have not already done so, click Add a new DN in the Association Information box to open the
Directory Number Configuration window.
Enter the directory information using the information in
Step 2
Table 1-15
Field
Directory Number
Route Partition
Description
Alerting Name
ASCII Alerting Name
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
1-32
Chapter 1
Directory Number Information, page 1-32
Directory Number Settings, page 1-33
AAR Settings, page 1-34
Call Forward and Call Pickup Settings, page 1-34
MLPP Alternate Party Settings, page 1-35
Line Settings for All Devices, page 1-35
Line X on Device X, page 1-36
Multiple Call/Call Waiting Settings on Device X, page 1-37
Forwarded Call Information Display on Device X, page 1-37
Cisco TelePresence Device Directory Number Information
Required?
Yes
-
-
Yes
-
Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Table 1-15
Setting
Phone number for the Cisco TelePresence device.
To use Cisco WebEx features, the phone number
Note
that is entered in Cisco Unified CM administration
must be configured in full, including the country
code, and must exactly match the phone number that
is entered in the CTMS administration Dial In
Number field.
Select from the drop-down menu or leave the default,
<None>.
Optional. Enter a device description.
Enter the CTS meeting room name.
Optional. Enter the ASCII alerting name.
as a guide.
OL-21851-01